Setting Up The Stacker - Fujitsu fi-5900C Operator's Manual

2.7 Setting up the Stacker

The document set on the hopper, once scanned, will be ejected onto the stacker.
You can adjust the inclination of Stacker table to align the leading edge of document or not. Also you can
fix the height of Stacker table for thin paper stacking.
Set up the Stacker by adjusting the Stacker extension, Stopper, Side Guides and Stacker's inclination.
■ Stacking the document
1. Pull out the stacker extension in accordance with document length.
ATTENTION
HINT
22

2.7 Setting up the Stacker

Stacker extension
Stopper
• Do not use the stopper to pull out the stacker extension. It may be dam-
aged.
• Be sure to extend the stopper longer than the document.
For short documents, use the small stopper.
Small Stopper