Fujitsu fi-5900C Operator's Manual page 176

Symptom 11
Did you adjust the offset
(starting position for scanning the
document)?
Have you used the "Page Edge Filler"
function?
If the problem can not be resolved with this flowchart, refer to
"6.4 Before Contacting a Service Provider."
After checking the items given in section 6.4, contact an authorized
FUJITSU scanner service provider or your dealer.
(*1) Refer to "8 SCANNER SETTINGS" on page
156
6.3 Troubleshooting
There is a shadow on the leading edge of the
generated image.
NO
YES
NO
YES
175.
Use the Software Operation
Panel to adjust the offset. (*1)
When you use this function, the
shadow on the leading edge
can be filled white.
Use the Software Operation
Panel to set the page edge
filling area. (*1)