Fujitsu fi-5900C Operator's Manual page 77

[Paper Handling] tab
Pre-pick
With this option, you can enable or disable Pre-picking. Pre-picking is an operation that feeds
documents into the ADF (to the scanning position) before starting actual scanning operation.
Select "On" to shorten the required time for scanning.
Backing
With this option you can set the background color (Black/White).
Multi-feed Detection
Multi-feed is an error that occurs when two or more sheets are fed simultaneously. You can set
conditions so that the scanner will stop its operation and display an error message when Multi-
feed is detected.
Multi-feed can be detected based on the "Paper Overlapping" or "Paper Length".
Skew
With this option, you can set the scanner so that it will stop its operation and display error
messages when any skewed document is detected.
Do not stop scanning upon detection
With this option, you can set the scanner so that it continues scanning even if any Multi-feed or
skew is detected.
Multifeed Recovery
Scaning is not restarted for the set period (minutes) of time after a multifeed error. This period is
specified here. If scanning is not started after the set minutes, the application is notified of the
error by the driver. If Auto-cancel timer is set to 0, the application will never be notified of the
error.
2.13 How to use the Scanner Driver
2
57