Fujitsu fi-5900C Operator's Manual page 203

Item
Alarm setting
For the beeper to sound the alarm of a paper
"Section 8.22" jam or multifeed, select Alarm at error.
Jam detection By selecting "Enable", such a case in which
outside of scan- the document is fed outside the scannable
nable area when
area due to abnormal skew can be judged as
transporting...
a paper jam.
"Section 8.23"
Imprinter Selec- Select the Pre-imprinter option or the Post-
tion
imprinter option if you have installed the
"Section 8.24" options (to be purchased separately).
Timeout for man- Specify the standby time period. After the
ual feeding
predetermined time period has elapsed,
"Section 8.25" manual feeding mode is canceled.
Scan Setting for
When the document has tab on the bottom
Document with edge of the image, the tab image remains
Tab even if the document is scanned with Auto-
"Section 8.26" matic paper size detection. When "Tab-
attached document" is specified, the tab
image remains in the scanned data but the
scanning speed may be rather slow.
Paper stop posi- When a multifeed error is detected by over-
tion at multifeed lapping of documents, the position to stop
error the documents on which the multifeed
"Section 8.27"
occurred can be selected.
Overscan Control Specify the optimal amount of black mar-
gins for overscan.
"Section 8.28"
Pause scanning Specify whether or not to suspend scan
operation with the [Send to] button while
"Section 8.29"
documents are being scanned.
Explanation Selectable parameter
Disable alarm/Enable alarm
Enable/Disable
Normal (obey Host specifica-
tion)/Forcibly select Pre-
imprinter/Forcibly select Post-
imprinter
5, 10, 20, 30, 40, 50, 60, 70, 80,
90, 100, 110 ,120, 180, 240,
300, 360, 420, 480, 540, 600,
900, 1200, 1800, 1999
(seconds)
Document with tab/Document
without tab
Normal / Paper output slot
Normal / Optimize
Enable / Disable
8.1 Scanner Settings
Default
Disable alarm
Disable
8
Normal
10 seconds
Document
without tab
Normal
Normal
Disable
183