Fujitsu fi-5900C Operator's Manual page 202

Item
Intelligent Multi-
If photograph or something is pasted on the
feed Function document and its size and/or position are
"Section 8.10" same, you can easily let the scanner memo-
"Section 3.12" rize its size and/or position just scanning the
document. To use this function, you need to
specify [Check overlapping] at [Multifeed
detection] by the procedure in
"Section 8.4"
or
Specify whether or not to remember the
multifeed pattern at power-off.
Number of paper This is specified to decrease picking retry
feeding retries times for earlier jam detection.
"Section 8.11"
Retain current The Paper thickness setting on the Operator
paper thickness panel is memorized and displayed after turn-
"Section 8.12" ing off and on the power.
Cleaning cycle
The cleaning cycle of the scanner is speci-
"Section 8.13" fied by this setting. When Page counter
(Consumable counter) exceeds the value
specified here, the background color of the
counter becomes yellow, and the message to
ask user to clean the scanner may appear.
Useful life coun- When the Page counter (Consumable coun-
ter ter) described in Section 5.2 exceeds the
"Section 8.14" value specified here, the counter background
color becomes yellow.
Set the interval Scanned image may be chipped at the bot-
for feeding sheets tom area, if the document is fed with large
"Section 8.15" skew. This trouble can be avoided by setting
the document clearance wider.
Thin Paper Mode To scan thin paper documents, enable this
"Section 8.16" mode.
Soft Pick Setting When a number of sheets are picked at a
"Section 8.17" time and multi-feed is detected frequently,
this setting may be effective.
Paper Jam
Specify the degree of jam detection at the
Detection feeder.
"Section 8.18"
AutoCrop Bound-
Specify the AutoCrop Boundary processing
ary
for when "Automatic Paper Size Detection"
"Section 8.19" is selected.
SCSI Bus Width Specify the data transfer width for SCSI
"Section 8.20" connection.
Auto Color Detec- Specify the slice level for automatically
tion detecting Color/Monochrome
"Section 8.21"
182
8.1 Scanner Settings
Explanation
"Section 3.7"
.
Selectable parameter
Manual mode/Auto mode 1/
Auto mode 2
Remember/Do not remember
1 to 12 times
Remember/Do not remember
1,000 to 255,000 sheets,with
1,000 sheets increment
Display of message: Yes/No
For each consumable
10,000 to 2,550,000 with
10,000 increment
4 steps from Short to Long
Disable/Thin paper mode/
Super-thin paper mode
Enable/Disable
Normal/Sensitivity low
Round Up/Round Down/Opti-
mize
16-bit (wide)/8-bit
1 to 255 (steps)
Default
Manual mode
Do not
remember
12 times
Do not
remember
10,000 sheets
No
600000
Short
Disable
Disable
Sensitivity-
Low
Round Down
16-bit (Wide)
5