Start Scanning - Fujitsu fi-5900C Operator's Manual

3. Start the application and display the scanner driver screen.
Set the scanning condition.
For the information about how to run the scanner driver, refer to
on page 30.
4.

Start scanning.

When using the TWAIN driver, click the [Scan] button on the following screen.
5. Load the documents towards the back of the hopper.
When more than one sheet is loaded, only the one on the top of the stack will be fed.
The document is picked up and ejected onto the stacker after scanning.
36
2.12 Feeding Documents Manually
"2.10 Scanning Documents"