Minimum Acceleration/Deceleration Times - Toshiba TOSVERT VF-A7 Instruction Manual

Parameter setting
a) Operation mode: Terminal board operation
Set the operation command mode selection  at .
b) Switching terminals: S3 and S4(Other terminals also can be settled for this purpose.)
S3 Acceleration/deceleration switching #1
S4 Acceleration/deceleration switching #2
Title


Acceleration/deceleration patterns
Acceleration and deceleration pattern can be selected individually for each of the acceleration/
deceleration times #1, 2, 3 and 4.
1) Linear acceleration/deceleration
2) S-pattern acceleration/deceleration #1
3) S-pattern acceleration/deceleration #2
Title




Refer to 6.23.1 for an explanation of the acceleration/deceleration patterns.
The settings of the S-pattern lower limit adjustment amount  and the S-pattern upper
limit adjustment amount  are reflected in every acceleration/deceleration pattern.

6.23.3 Minimum acceleration/deceleration times


Function
This parameter sets the minimum acceleration and deceleration times.
[Parameter setting]
Title
 Acceleration/deceleration time lower limit
Note) To set the minimum acceleration or deceleration time to less than 0.1 second, set
 (Decimal place number of acc/dec time) at (0.01 second) in advance so that
the time can be displayed in units of 0.01 second.
Refer to 6.29.4 for the parameter (Decimal place number of acc/dec time).
Function
Input terminal selection #7 (S3)
Input terminal selection #8 (S4)
Function
Acceleration/deceleration
pattern #1
Acceleration/deceleration
pattern #2
Acceleration/deceleration
pattern #3
Acceleration/deceleration
pattern #4
Acceleration/deceleration lower limit
Function
Adjustment range
 
 
Adjustment range
: Linear, : S-pattern #1,
: S-pattern #2
: Linear, : S-pattern #1,
: S-pattern #2
: Linear, : S-pattern #1,
: S-pattern #2
: Linear, : S-pattern #1,
: S-pattern #2
Adjustment range
  [s]
F-53
Default setting
(Acc/dec switching #1)
(Acc/dec switching #2)
Default setting




Default setting
