Information on output terminals
Information on output terminals and output terminals are for the optional add-on cassette.
Type of connected option
Note1) Connection of add-on cassette options are reflected in this display.
Note2) Connection of PG feedback boards are not in this display.
Total (accumulated) operation hours
For indication of total operation hours, running hours are counted up when the output frequency
monitor reads a frequency other than 0.0 Hz. 10 hours is indicated as 0.1 (unit of indication). Total
hours is indicated in the range from "" to "" that represent 10 hours and 9999 hours
respectively.
Output terminal #1 OUT1
Output terminal #2 OUT2 :F131
Output terminal #3 FL
Output terminal #4 R1
Output terminal #5 R2
Output terminal #6 OUT3
Output terminal #7 OUT4
Output terminal #4,5 : Expansion TB option unit
Output terminal #6,7 : Vector option unit
Error code output #0 ALM0
Error code output #1 ALM1
Error code output #2 ALM2
Error code output #3 ALM3
Error code output #0,1,2,3 : Vector option unit
Expansion TB option unit
Vector option unit
Expansion TB option unit & Vector option unit( )
F10M option unit
S20 option unit
H-3
:F130
:1 When there is signal output
:2
:F132
:3 When there is no signal output
blank in the upper half
:F133
:4 When there is signal output
:F134
:5
:F135
:6 When there is no signal output
:F136
:7
blank in the upper half
:8 When there is signal input
:9
:10 When there is no signal input
:11
blank in the upper half