Toshiba TOSVERT VF-A7 Instruction Manual page 187

(Continued from the preceding page)
Com.No. Details of indication Key operated LED display
FE10 Past trip #1
FE11 Past trip #2
FE12 Past trip #3
FE13 Past trip #4
Cumulative
FE14
operation time
Standard monitor
mode
Note 1: When or
Note 2: Contents of status indications of *1, *2, *3, *4 and *5 can be selected from 30 kinds of information.
Unit of current and voltage indications can be changed from % to A (amperage) and V (voltage)
and vice versa respectively.
Note 3: Indicated input voltage is DC voltage just after input voltage is rectified multiplied by 1/ 2.
Note 4: Past trip is in order of 1(last) 2 3 4(oldest)
Note 5: Cumulative operation time indicates a total of actually running hours.
Information on input terminals
Information on  input terminals and  input terminals are for the optional add-on cassette.


Note) When  is set at a number of  to  expansion TB option input terminal information (,)
indicate information of lower 8 bit terminal (B0 B7).
 
 
 
 


Note 1
key is pressed, indication changes in the status monitor mode.
Input terminal #1 F
Input terminal #2 R
Input terminal #3 ST
Input terminal #4 RES
Input terminal #5 S1
Input terminal #6 S2
Input terminal #7 S3
Input terminal #8 S4
Input terminal #9
Input terminal #10 B9
Input terminal #11 B10
input terminal #12 B11

Input terminal #13 B12
Input terminal #14 B13
Input terminal #15 B14
Input terminal #16 B15
Input terminal #9 to #16: Expansion TB option unit
H-2
Description
(Alternately blinking at intervals of 0.5
second) Past trip #1
(Alternately blinking at intervals of 0.5
second) Past trip #2
(Alternately blinking at intervals of 0.5
second) Past trip #3
(Alternately blinking at intervals of 0.5
second) Past trip #4
Indication of total (accumulated) operation
hours(Indication of 0.1 represents 10 hours.)
Running frequency indication(in operation)
:F111 :0
:F112 :1 When there is signal input
:F113 :2
:F114 :3 When there is no signal input
:F115 :4 (Blank in the upper half)
:F116 :5
:F117 :6
:F118 :6
B8 :F119 :8 When there is signal input
:F120 :9
:F121 :10 When there is no signal input
:F122 :11 (Blank in the upper half)
:F123 :12 When there is signal input
:F124 :13
:F125 :14 When there is no signal input
:F126 :15 (Blank in the upper half)