How To Set Extended Parameters - Toshiba TOSVERT VF-A7 Instruction Manual

4.1.2 How to set extended parameters

The VF-A7 inverter has extended parameters to allow you to make full use of its functions.
The code of every extended parameter is composed up of an  and a 3-digit number.
Extended parameter
Press the Monitor key once, then press
the or
(

parameters.
[Procedure for setting an extended parameter]
MON
ENT
ENT
ENT









key to select a parameter
) from among the basic

Press the Monitor key to switch to parameter setting
mode. ( is displayed.)
Select the parameter ( ) the code of which
is the closest to that of the parameter you want to change.
Press the Enter key to activate the selected parameter.
Select the parameter you want to change .
Press the Enter key to display the extended parameter
setting (value) you want to change.
Change the extended parameter setting (set value).
Press the Enter key to save the change.
You can return to the previous step by pressing the
instead of the
ENT
MON
Select the parameter you want to
change by pressing
key, then press the Enter key to
display the parameter setting.
key.
ENT
D-4
 
 
 
 
 
 
 
 
 
and
key
MON