Changing Status Monitor Function - Toshiba TOSVERT VF-A7 Instruction Manual

8. 2 Changing status monitor function

Changing indication of status with power on
The standard monitor mode ( 1) indicates running frequency (with default setting) such as
"" when power is on or "" when power is off, however, such the standard indication
can be changed into arbitrary indication as shown on page H-5. When the standard monitor
indication is changed for an option, each indication appears lacking in the initial letter (, ,
etc.).
Standard monitor mode
Title
 Monitor display mode setting  (Refer to the next page.)
Changing contents of status monitor indication
Regarding contents of status monitor indications appearing in the left column of the table on
page H-1, those marked with 2 to 5 can be changed for others. Select a desirable monitor
function from among optional monitor functions appearing on page H-5.
2 Frequency command
3 Load current
4 Input voltage
5 Output voltage
Title
 Status monitor #1 display mode
 Status monitor #2 display mode
 Status monitor #3 display mode
 Status monitor #4 display mode
If  to  are set at "" (Running frequency) the running frequency is not held
in trip status.
Standard monitor indication selection 
Function
Changeable by status monitor #1 display mode ().
Changeable by status monitor #2 display mode ().
Changeable by status monitor #3 display mode ().
Changeable by status monitor #4 display mode ().
Function
H-4
Adjustment range
Adjustment range
 
(Refer to the next page.)
 (ditto)
 (ditto)
 (ditto)
Default setting

Default setting



