Switching Of Acceleration/Deceleration #1, 2, 3 And 4 - Toshiba TOSVERT VF-A7 Instruction Manual

6.23.2 Switching of acceleration/deceleration #1, 2, 3 and 4








Function
With these parameters, you can set 4 acceleration and deceleration times. Acceleration
and deceleration times can be selected or switched by any of the following 3 method:
1) Selection with parameters
2) Switching by means of frequencies
3) Switching with terminals
Title
Acceleration time #2

Deceleration time #2

Acc/dec time #1, 2, 3, 4

selection
Acceleration time #3

Deceleration time #3

Acceleration time #4

Deceleration time #4

) Selection with parameters
Output frequency [Hz]
 
 
 
 
The acceleration/deceleration time selection parameter has been set at 1 by default. The setting
of  can be changed from  to ,  or . (The setting of  is valid when  is
set at 1.)
Acceleration time #2
Deceleration time #2
Acc/dec #1,2,3,4 selection
Acc/dec switching frequency #1
Acceleration time #3
Deceleration time #3
Acc/dec switching frequency #2
Function





Acceleration time #4

Deceleration time #4

 Acc/dec switching frequency #3
 Acc/dec pattern #2
 Acc/dec pattern #3
Acc/dec pattern #4

Adjustment range
()  [s]
()  [s]
: Acc/dec #1, : Acc/dec #2,
: Acc/dec #3, : Acc/dec #4
()  [s]
()  [s]
()  [s]
()  [s]

F-51
Default setting
Model dependent
Model dependent
Model dependent
Model dependent
Model dependent
Model dependent
time [s]



