Configuring The Answering Machine In The Network For Fast Access - Gigaset C2 Operating Manual

~
Í
s
Save entry
Entering or changing the country code:
On the base:
SX303isdn
Phone numbers transferred from the GSM network always contain the international
country code, even when dialling within a country (e.g., +49 for Germany, +33 for
France, +39 for Italy, or +43 for Austria).
Therefore, a special setting for the country code is necessary if you have received a call
from the GSM network, this call was transferred into the directory or the calls list, and
you would like to call back from the directory or the calls list via the ISDN network.
Default settings: country code of each country (e.g., +49 in Germany).
v
s
Base Settings
s
Settings
~
OK
s
ISDN settings
s
Lg.-dist. code
s
Code :
v
s
Change number
~
Í
s
Save entry

Configuring the answering machine in the network for fast access

On the base: CX100isdn
Precondition: You can only use the answering machine of your network provider in the
network if you have applied for it with your network provider.
As soon as the phone number of the answering machine has been entered in the net-
work, you can use fast access. You can dial the answering machine in the network
directly by holding down the key 1.
Enter a new or changed long distance prefix and
open the menu.
Select the menu item and confirm.
OK
SX353isdn
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select.
Open the submenu.
Select the menu item and confirm.
OK
Enter the country code and open the menu.
Select the menu item and confirm.
OK
SX100isdn SX205isdn
System settings
CX203isdn SX303isdn
125