Operating With Other Devices; Setting Device Type; Making Calls With Devices On The Analogue Connection (Tae Connection) - Gigaset C2 Operating Manual

Operating with other devices

Setting device type

at the base:
SX205isdn
MENU
s
Set base
s
Settings
~
OK
s
Setup user
Setup device
s
INT 21
MENU
s
Device type
s
Fax
MENU
Save entry
If the setting is changed from a device type that does not require a receive
i
MSN to one that does, all MSNs that are programmed in the system will
be transferred as active receive MSNs for this internal user.
Making calls with devices on the analogue connection
(TAE connection)
at the base: SX205isdn
Telephones with tone dialling (DTMF = dual tone multi-frequency dialling) can be oper-
ated on analogue connections. Telephones with pulse dialling are not supported.
For notes on making calls with devices on the analogue connection,
i
please refer to the operator's manual for the base.
SX255isdn SX303isdn
Press display key to open menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 78).
Select the menu item and confirm.
OK
Confirm.
OK
Select the internal number, e. g. INT 1121.
Open the submenu.
Select the menu item and confirm.
OK
Select a device type and confirm, e. g. Fax.
Open the submenu.
Confirm. The name is now shown in the internal list,
OK
including when an internal call is made from this
internal number.
SX255isdn SX303isdn
Operating with other devices
SX353isdn
SX353isdn
95