Attaching The Belt Clip - Gigaset C2 Operating Manual

Preparing to use the handset
Your handset is now ready for operation. To correctly record the time of calls and, if
applicable, messages you must now set the date and time. Depending on the network
provider, the date and time are updated automatically by the telephone network with
every outgoing call. All the settings necessary for operating the telephone can also be
set up easily with the Getting started wizard (page 14).

Attaching the belt clip

Push the belt clip onto the back of the handset until the lugs click into the recesses on
either side of the handset.
Activating/deactivating the handset
To activate the handset, press the end call key a and hold. You will hear a confirmation
tone (rising tone sequence).
To deactivate the handset, press the end call key a again in the idle status and hold
(confirmation tone).
The deactivated handset activates automatically when placed in the base
i
or charger.
Activating/deactivating the keypad lock
You can lock the handset keypad if, for example, you are carrying the handset. This pro-
tects the keypad against inadvertent activation.
Press and hold the hash key R. You will hear a confirmation tone and the symbol Ø
will appear in the display.
To deactivate
on S1, C1, C2:
◆
Press the hash key R again and hold (confirmation tone).
On SL1:
◆
R
OK
10
Press the hash key R again and hold.
Press the display key to deactivate the keypad lock.
If the display key is not pressed within 5 seconds, the
handset returns to keypad lock.