System Settings; Changing The Name For An Internal Party - Gigaset C2 Operating Manual

System settings

System settings
The abbreviations in brackets after the titles indicate the ISDN service concerned. Some
services may only be used if they have been authorised by the network provider (there
may be an extra charge).

Changing the name for an internal party

When the phone is supplied, all internal numbers are allocated the names Int.11, Int.12
etc., according to their numbering. You can change these entries individually to suit
your requirements.
MENU
s
Base Settings
s
Settings
~
OK
s
Setup user
s
Setup device
s
Int.11
MENU
s
Name
~
MENU
Save entry
Since names are saved in the base station, another name can be allocated
i
to a handset when registering to a different base. This makes it possible
to recognise which base the handset is currently connected to.
80
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 78).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select internal number, e. g. Int.11.
Open the submenu.
Select the menu item and confirm.
OK
Change the name and open the menu.
Confirm. The name is now shown in the internal list,
OK
including when an internal call is made from this
internal number.