System settings
System settings
The abbreviations in brackets after the titles indicate the ISDN service concerned. Some
services may only be used if they have been authorised by the network provider (there
may be an extra charge).
All the settings for the base are made with a registered S 1 handset.
Changing the names for internal users
By factory default, all internal numbers are given the names Int.11 , Int.12 , etc., accord-
ing to their numbering. You can change these entries to suit your individual needs.
v
s
Base Settings
s
Settings
~
OK
s
Setup user
s
Setup device
s
Int.11
v
s
Name
~
Í
s
Save entry
Since names are saved in the base station, another name can be allocated
i
to a handset when registering to a different base. This makes it possible
to recognise which base the handset is currently connected to.
110
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select internal number, e.g. Int.11 .
Open the submenu.
Select the menu item and confirm.
OK
Change the name and open the menu.
Select the menu item and confirm. The name is now
OK
shown in the internal list, including when an internal
call is made from this internal number.