Gigaset C2 Operating Manual page 20

Confirm the prompt with
If your MSNs can be found, the number of MSNs found will be shown on the display
◆
and the MSNs entered.
If your MSNs cannot be found (e.g., because MSNs are already entered or the net-
◆
work provider does not support this function), a message about this will be dis-
played. You must enter the MSNs manually (see next section).
Entering your phone numbers (MSNs) manually and entering names for the MSNs:
The display shows: Find own numbers (MSN)?
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
~
s ~
Í
s
Save entry
The MSNs entered will automatically be assigned to all registered handsets as incoming
and outgoing MSNs.
This sequence will then be repeated for MSN2 to MSN10.
Setting the device type:
On the base:
SX205isdn
If your base offers the option of connecting an analogue terminal, you must set the
device type (see operating instructions for the base).
The display shows: Setting the device type?
If you have connected an analogue device to your base, select
The display shows: Set device type for internal 21?, select
Select the applicable entry and confirm with
for the base will indicate which settings are possible.
Briefly press the menu exit key j to continue.
.
YES
Press the display key to confirm the prompt.
Press the display key to confirm the prompt.
Enter name
If necessary, scroll to the line <Number> and enter
.
the MSN If the MSNs were found automatically, the
numbers will already be entered.
Press the display key to open the submenu.
Select the menu item and confirm.
OK
SX255isdn SX303isdn
Preparing to use the handset
.
Entering a name for an MSN is optional.
SX353isdn
YES
.
YES
(‰ = on). The operating instructions
OK
.
17