Gigaset C2 Operating Manual page 22

Using with a PABX:
Only carry out the following steps if you want to connect your telephone to a private
PABX (thus not directly to a NTBA). In this case, you must enter an access code (outside
line code) for external calls when getting started the first time, depending on the PABX.
See the operating instructions for your PABX. You can enter a one to four-digit access
code.
The display shows: Operate behind PABX?
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
~
Í
s
Save entry
The display shows Installation completed. Press the end call key a, to return to the
idle status of the handset.
Press the display key to confirm the prompt.
Press the display key to confirm the prompt Set
access code?.
Enter the access code (outside line code)
Press the display key to open the submenu.
Select the menu item and confirm. The Getting
OK
started wizard is closed.
Preparing to use the handset
.
19