Setting The Answering Machine; Assigning A Receive Msn - Gigaset C2 Operating Manual

Setting the answering machine

On the base: CX150isdn
Once you have connected your telephone your answering machine is ready for use.
Answering machine AM1 is set to be shown and activated. It displays all messages (on
all receive MSN's). AM1 can be played back and set from all handsets (factory default).
All phrases in the answering machine are in English.
As supplied, AM2 and AM3 are hidden (page 82) and are deactivated. To use them, they
must be shown and all shown answering machines must be assigned their own incom-
ing MSN.
You can configure AM1, AM2 and AM3 separately.

Assigning a receive MSN

You can assign one or more receive MSN's to each (shown) answering machine (AM1,
AM2, AM3). However, each MSN can only be assigned to one answering machine (only
one recording can be running at any one time).
v
s
Base Settings
s
Settings
s
Setup user
Setup device
s
v
s
Receive MSN
s
Once an answering machine has been assigned to a receive MSN it can only be set and
operated via handsets/terminals to which the same receive MSN is assigned.
SX150isdn CX253isdn
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Confirm.
OK
Select answering machine, INT 91: AM 91 for AM1,
INT 92: AM 92 for AM2 or INT 93: AM 93 for AM3.
Open the submenu.
Select the menu item and confirm.
OK
Select the receive MSN and confirm, e.g. MSN:
OK
Anna. Only the MSN's that are still not assigned to
an answering machine are offered.
Repeat this process for all incoming MSNs you want
to assign to the answering machine.
Setting the answering machine
SX255isdn SX353isdn
81