Preparing to use the handset
Removing protective film
Inserting the batteries
Insert the batteries ensuring correct polarity (see figure on left).
◆
Place the cover on the battery compartment about 3 mm down from the latch and
◆
push it up until it clicks into position.
Gigaset C2:
Use only the rechargeable batteries recommended by Siemens on
page 104! i. e. never use conventional (non-rechargeable) batteries or
W
other battery types as this may cause significant damage to health and
property. For example, the jacket of the battery could be destroyed (haz-
ardous). The phone could also malfunction or be damaged.
Opening the battery compartment
Press on the ribbed section of the cover and push the cover downwards.
Charging batteries
1. The charging is indicated in the upper right of the display where the charging status
V
flashes:
=
Batteries (almost) flat
e
1
Batteries
/
i
To register additional handsets, refer to page 14.
The display is protected by a plastic film.
Please remove the protective film!
charged
3
Preparing to use the handset
V
2
Batteries
/
charged
3
U
Batteries fully charged
9