Fuse Inspection - Yamaha YP250 Service Manual

BATTERY INSPECTION/FUSE INSPECTION
6. Inspect:
D Battery terminals
Dirty terminal ! Clean with wire brush.
Poor connection ! Correct.
NOTE:
After cleaning the terminals, grease them light-
ly.
7. Install:
D Battery
8. Connect:
D Battery leads
CAUTION:
Connect the positive lead first and then connect
the negative lead.
9. Install:
D Cover (battery case)
D Mat (right)
Refer to "COVER AND PANEL" section.
YP305010

FUSE INSPECTION

CAUTION:
Always turn off the main switch when checking
or replacing the fuse. Otherwise, a short circuit
may occur.
1. Remove:
D Mat (right)
D Cover (battery case)
Refer to "COVER AND PANEL" section.
2. Inspect:
D Fuse
*****************************************************
Inspection steps:
D Connect the Pocket tester to the fuse and
check it for continuity.
NOTE:
Set the tester selector to "
Pocket tester:
90890-03112
D If the tester is indicated at
fuse.
*****************************************************
3-42
INSP
ADJ
1" position.
. Replace the