Recommended Engine Oil; Engine Oil Replacement - Yamaha YP250 Service Manual

ENGINE OIL LEVEL INSPECTION/

ENGINE OIL REPLACEMENT

RECOMMENDED ENGINE OIL

Refer to the chart for selection of the oils suited
to the atomosperic temperature.
D Do not put in any chemical sdditives or
D Be sure not to use oils labeled "ENERGY
D Be sure no foreign material enters the
NOTE:
Wait a few minutes until the oil settles before in-
specting the oil level.
YP*****
ENGINE OIL REPLACEMENT
NOTE:
Check the O-ring (drain plug). If damaged, re-
place it with a new one.
3-16
API STANDARD:
API SE or higher grade
CAUTION:
use oils with a grade of CD a or higher.
CONSERVING II" b or higher. Engine oil
also lubricates the clutch and additives
could cause clutch slippage.
crankcase.
5. Start the engine and let it warm up for a few
minutes.
6. Turn off the engine.
1. Start the engine and let it warm up for sev-
eral minutes.
2. Turn off the engine and place an oil pan un-
der the engine.
3. Remove:
D Oil filler plug
D Drain plug 1
D Compression spring 2
D Oil strainer 3
D O-ring
Drain the crankcase of its oil.
4. Install:
D O-ring 1
D Compression spring 2
D Oil strainer 3
D Drain plug 4
D Oil filler plug
INSP
ADJ
32 Nm (3.2 mSkg)