Rear Brake Adjustment - Yamaha YP250 Service Manual

AIR BLEEDING (HYDRAULIC BRAKE SYSTEM)/

REAR BRAKE ADJUSTMENT

NOTE:
When bleeding the brake system, make sure
that there is always enough brake fluid in the
brake fluid reservoir before applying the brake
lever. Ignoring this precaution could allow air to
enter the brake system, considerably lengthen-
ing the bleeding procedure.
j. Tighten the bleed screw.
D Bleed screw
NOTE:
If bleeding is difficult, it may be necessary to let
the brake fluid settle for a few hours. Repeat the
bleeding procedure when the tiny bubbles in the
brake system have disappeared.
k. Fill the brake fluid reservoir to the proper
level.
Check brake operation after bleeding the brake
system.
*****************************************************
YP******
REAR BRAKE ADJUSTMENT
1. Check:
D Brake lever free play 1 (rear)
2. Adjust:
D Brake lever free play
*****************************************************
Adjustment steps:
Handlebar side:
D Loosen the locknut (s) 1 .
D Turn the adjuster (s) 2 in or out until the spe-
cified free play is obtained.
Turning in ! Free play is increased.
Turning out ! Free play is decreased.
3-29
6 Nm (0.6 mSkg)
Refer to "BRAKE FLUID LEVEL IN-
SPECTION".
Out of specification ! Adjust.
Free play:
10 X 20 mm
INSP
ADJ