Yamaha YP250 Service Manual page 47

Steering head pipe
1
Brake cable 2
2
Mainharness
3
Downtube
4
Throttle cable
5
Radiator
6
Stay 1
7
A Pass the brake cable 2 though
the clamp on the handlebar
holder.
B Band the brake cable 2 to the
steering head pipe, noting the
band direction. (view A)
C Band the throttle cable and the
right mainharness to the
CABLE ROUTING
downtube, noting the band
direction. (view B)
D Band the brake cable 2 to the
frame at the upper part of the
radiator, noting the band
direction. (view C)
E Band the brake cable 2 at the
left front of the steering head
pipe and set the rest of the
band to the left.
F Set the lock of the band in this
range.
G Clamp the brake cable in front
of the pipe.
H Put the rest of the band end to
the side.
2-25
SPEC
I Pass the brake cable through
the guide ring.
J Pass the brake cable 2 through
the guide on the frame.
K Clamp the brake cable 2 to the
frame.
(Up and down)
Align the locating mark of the
brake cable 2 with the under
clamp.