Headlight Beam Adjustment - Yamaha YP250 Service Manual

Motorcycle yp250 4uc-ae1
Hide thumbs Also See for YP250:
Table of Contents

Advertisement

FUSE INSPECTION/HEADLIGHT BEAM ADJUSTMENT
3. Replace:
D Blown fuse
*****************************************************
Replacement steps:
D Turn off the main switch.
D Install a new fuse with the proper current rat-
ing.
D Turn on switches to verify operation of related
electrical devices.
D If the fuse blows again immediately, check
the electrical circuit.
Never use a fuse with a rating other than that
specified. Never use other materials in place
of a fuse. An improper fuse may cause ex-
tensive damage to the electrical system,
malfunction of lighting and ignition systems
and could possibly cause a fire.
*****************************************************
4. Install:
D Side panel
D Panels
Refer to "COVER AND PANEL" section.
EB305022

HEADLIGHT BEAM ADJUSTMENT

1. Adjust
D Headlight beam (vertical)
Turn the adjuster 1 in or out.
Turning in ! Headlight beam moves
Turning out ! Headlight beam moves
2. Adjust:
D Headlight beam (horizontal)
Turn the adjuster 2 in or out.
Turning in ! Headlight beam moves
Turning out ! headlight beam moves
3-43
INSP
ADJ
lower.
higher.
right.
left.

Advertisement

Table of Contents
loading

Table of Contents