HANDLEBAR
YP******
HANDLEBAR REMOVAL
1. Remove:
S Grip (Left)
*****************************************************
Removal steps:
D Remove the grip end (left).
D Blow with compressed air between the han-
dlebar and adhesive side of the grip to re-
move.
*****************************************************
YP704020
HANDLEBAR INSPECTION
1. Inspect:
S Handlebar
Bends/Cracks/Damage ! Replace.
Do not attempt to straighten a bent handle-
bar as this may dangerously weaken the
handlebar.
YP******
HANDLEBAR INSTALLATION
1. Install:
S Handlebar 1
NOTE:
D Apply a light coat of lithium soap base grease
onto the handlebar right end.
D Align the match marks a on the handlebar
with the lower handlebar holder upper sur-
face.
2. Install:
S Upper handlebar holder 1
23 Nm (2.3 mSkg)
NOTE:
The upper handlebar holders should be
installed with the arrow marks a facing forward
a .
3. Install:
S Grip 1
S Grip end (Left) 2
NOTE:
Provide a clearance a of 2.5 mm between the
handlebar grip and handlebar grip end.
7-32
CHAS