Logging In, Setting The Web Configurator; Language - Siemens Gigaset CE460 IP R User Manual

Logging in, setting the Web configurator language
Once you have successfully established the connection, the
displayed in the Web browser.
You can select the language you want the menus and Web configurator dialogues to be
displayed in. The language that is currently selected is displayed in the top field of the Web
page.
¤
If necessary, click
¤
Select the language.
¤
In the bottom field of the Web page, enter your router's or phone's system PIN (default
setting: 0000) to access the Web configurator functions.
¤
Click OK.
Once you have successfully logged in, a
configurator.
Please note:
– If you have forgotten your system PIN, you will have to reset your base station to the factory set-
tings. Please note that this will restore all other settings too (page 57).
– If you do not make any entries for a lengthy period (around 10 minutes), you will be automatically
logged off. The next time you try to make an entry or open a Web page, the
be displayed. Enter the system PIN again to log in again.
– Entries that had not yet been saved in the router or on the phone before automatic log-off are lost.
Menu bar
The following menus are available in the phone Web configurator:
u
Home
The start screen is opened once you have registered with the Web configurator. It con-
tains information on the Web configurator menus.
u
(page 85)
Settings
This menu allows you to make settings on your phone.
u
(page 108)
Status
This menu gives you information about your phone.
u
Router-Settings
You can use this menu to start the router Web configurator (page 69), to make settings
on the base station router.
86
to open the list of available languages.
Home
Logging in, setting the Web configurator language
Login
opens with general information on the Web
Web page will be
Web page will
Login