Connecting The Base Station - Siemens Gigaset CE460 IP R User Manual

First steps

Connecting the base station

To be able to make calls via VoIP with your base station, you must connect the base station
with the Internet (WAN connection). You can connect additional devices to the base station
LAN connection; these devices can access the Internet via the base station router,
see Figure 1.
3
Figure 1 Base station connection
1 DSL modem for the Internet connection (WAN connection)
2 Gigaset CE 460 IP R base station
3 Gigaset C46 handset
4 Base station LAN connection, e.g.for the PC, hub, switch, router of a subnet
Follow the steps in the order given below:
1. Connect the base station WAN connection with the DSL modem
2. Connect the base station LAN connection with the Ethernet connection on your PC
3. Connect the base station with the mains power supply
Please note:
If there are devices connected to your modem (e.g. your PC), you must first shut these
down and switch them off. Then switch the modem off and disconnect it from the mains
power supply.
12
4
LAN
2
WAN
Connecting the base station
Internet
1