Siemens Gigaset CE460 IP R User Manual page 63

Activating/deactivating dynamic assignment
¢ ¢
Settings
§Menu§
~
Enter the system PIN and press
(‰ = on)
dynamic IP address
Select and press
If you deactivate dynamic assignment, you must set the base station, default gateway and
DNS server IP address and subnet mask manually. A corresponding message is displayed.
Please note:
To assign the IP address dynamically, the DHCP server on the router must be activated (page 80).
Viewing/changing the phone's IP address
You can only change the IP address (page 140) if you have deactivated dynamic assign-
ment.
192.168.1.2 has been preset by default.
¢ ¢
Settings
§Menu§
The current IP address is displayed.
~
If necessary, enter the IP address and press
Please note:
For notes on the IP address, please see page 87 and the glossary on page 140.
Viewing/changing the subnet mask
You can only change the subnet mask (page 144) if you have deactivated dynamic assign-
ment.
255.255.255.0 has been preset by default.
¢ ¢
Settings
§Menu§
The current subnet mask is displayed.
~
If necessary, enter the subnet mask and press
Please note:
For notes on the subnet mask, please see page 87 and the glossary on page 144.
60
¢
Base Local Network
to change the current settings.
§OK§
¢
Base Local Network
¢
Base Local Network
Setting the base station phone's IP address in LAN
.
§OK§
¢
(enter system PIN)
.
§OK§
¢
(enter system PIN)
.
§OK§
IP Address
Subnet Mask