Functions During A Call - Siemens Gigaset CE460 IP R User Manual

Functions during a call

Functions during a call
The following functions are only available if you permit two parallel VoIP connections for
your telephone (see page 97,
Consultation
During a VoIP call:
¢
External Call
§Menu§
~
Enter the number or copy from the directory.
c
Press the talk key.
The number will be dialled via the handset's VoIP sending number.
Please note:
– If the second VoIP connection is busy or there is no second VoIP connection available, you will hear
a busy tone and return to the first participant.
– After a few seconds, the number selected for a consultation call is saved in the last number redial
list.
– If the participant does not answer: press a. You are reconnected to the first participant.
If the participant answers, you have the following options:
u
Toggling:
¤
Use q to toggle between the participants.
– End call with active participant:
u
Conference call:
– Talk to both participants:
– End conference call (toggle):
– End call with both participants: Press the end call key a.
Accepting call waiting
Precondition: Call waiting is activated (page 38). You are making an internal call or a call
via VoIP.
¢
Accept Call Waiting
§Menu§
If the first call was an internal call, the internal connection is ended.
If the first call was an external call, you can opt to toggle or hold a conference call.
Please note:
An internal call waiting is shown on the display. You can neither accept the internal call nor reject it.
Allow 1 VoIP call only).
¢
End Active
§Menu§
¢
Conference
§Menu§
¢
End Conference.
§Menu§
Call.
Call.
39