Table of Contents
Advertisement
Structure of the Web pages
Navigation area
The functions of the menu selected in the menu bar are listed in the navigation area.
If you click a function, the associated page opens in the working area with information and/
or fields for your inputs.
If a function is assigned subfunctions, these are displayed with the function as soon as you
click the function. The relevant page for the first subfunction is displayed in the working
area.
Working area
Depending on the function selected, information or dialogue boxes are displayed in the
working area, which allow you to make or change your phone settings.
Making changes
Make settings for entry fields, lists or options.
u
There may be restrictions regarding the possible values for a field, e.g. entering special
characters or certain value ranges.
u
To open a list, click
u
There are two kinds of options:
– Options in a list, from which you can activate one or several options. Active, i.e.
selected options are highlighted with
vate an option by clicking on
change. You can deactivate an option by clicking on
– Alternative options. The active option in the list is highlighted with
active with
option is deactivated. You can only deactivate an option by activating another option.
Applying changes
As soon as you have made your change on a page, activate the new setting in the router or
on the phone by clicking on Set.
If your input in a field does not comply with the rules for this field, an appropriate error
message will be displayed. You can then repeat the input.
Warning:
Changes that have not been saved in your router or phone are lost if you move to another Web page
or if the connection to the Web configurator is terminated, e.g. due to exceeding the time limit
(page 65).
. You can choose between default values.
. The status of the other options in the list does not
. You can activate an option by clicking on
, non-active options with
.
. The previously activated
. You can acti-
, and the non-
67
Advertisement
Table of Contents
