Table of Contents
Advertisement
Using several handsets
Registering handsets
You can register up to six handsets to your base station.
Please note:
After registration, all the phone numbers for the phone will be assigned to the handset as receiving
numbers. It uses the first VoIP number as sending numbers. For how to change the assignments, see
page 100.
Registering another Gigaset C46 handset
Before you can use your handset, you must register it to a base station.
You must initiate handset registration on the handset and on the base station.
If the handset has been registered successfully you will see the display key
bottom left of the idle display. If it does not appear, repeat the procedure.
On the handset
¢
¢
Settings
Menu§
~
Enter the system PIN of the base station (the default is 0000) and press
The display shows e.g.
On the base station
÷
Within 60 sec. press and hold the registration/paging key on the base station
(page 1) (min. 1 sec.).
The handset is assigned the lowest available internal number (1-6). If several handsets are
registered to the base station, the internal number is shown in the display after registra-
tion, e.g.
2. This means that the handset has been assigned the internal number 2.
INT
Please note:
If six handsets are already registered to the base station, there are two options:
– The handset with the internal number 6 is in idle status: the handset you wish to register is
assigned the number 6. The handset that was previously number 6 is de-registered.
– The handset with the internal number 6 is being used: the handset you wish to register cannot be
registered.
48
¢
Handset
Register Handset
Registering
and
flashes.
Base
Registering handsets
at the
§INT§
.
§OK§
Advertisement
Table of Contents
