Table of Contents
Advertisement
Appendix
Symbols and typographical conventions used
This section explains the meaning of certain symbols and typographical conventions that
are used in this user guide.
~
Enter digits or letters.
The display functions currently in the bottom display line are shown in reversed
§Menu§
highlights. Press the relevant display key to launch the function.
q
Press up or down on the control key, e.g. when scrolling.
c / Q / P etc.
Press the matching key on the handset.
External Calls
/
Internal Calls
Select one of the menu functions
and press
¢
Audio Settings
§Menu§
Press
§Menu§
using q and press
Care
¤
Wipe down the base station and handset with a damp cloth (no solvents) or an anti-
static cloth.
Never use a dry cloth. This can cause a build up of static.
Contact with liquid
If the handset has come into contact with liquid:
¤
Switch the handset off and remove the batteries immediately.
¤
Allow the liquid to drain from the handset.
¤
Pat all parts dry, then with the battery compartment open and the keypad facing down
place the handset in a dry, warm place for at least 72 hours (not in a microwave, oven
etc.).
¤
Do not switch on the handset again until it is completely dry.
When it has fully dried out, you will normally be able to use it again.
112
(example)
.
§OK§
¢
(example)
Ringer Melody
. Select
Audio Settings
.
§OK§
!
Symbols and typographical conventions used
(External Calls
or
Internal
using q and press
Calls) from the list
. Select
Ringer Melody
§OK§
Advertisement
Table of Contents
