Siemens Gigaset CE460 IP R User Manual page 16

Connecting the base station
Connecting the base station with the modem
Connect the socket labelled WAN on your base station with your DSL modem. To do this,
use the Ethernet cable supplied.
1
2
1 Side view of the base station
2 Network plug (WAN) with network cable
3 DSL modem
Connecting the PC with the base station
Before connecting a PC or laptop with the base station, please ensure:
– that a suitable network adapter is installed in/connected to your PC. Please read the operating
instructions that came with the adapter.
– that the DHCP client is enabled on your PC.
Connect the socket labelled LAN on your base station with the Ethernet connection of your
PC. To do this, use a category 5 (CAT5) Ethernet cable with RJ45 modular jacks on both
sides.
1
2
1 Side view of the base station
2 Network plug (LAN) with network cable
3 Ethernet connection on your PC
Please note:
To get started, you must connect your base station and PC directly via the Ethernet cable!
3
3
3
3
First steps
13