Configuring The Internet Connection On The Base Station Router - Siemens Gigaset CE460 IP R User Manual

Configuring the Internet connection on the base station router

Configuring the Internet connection on the base station router
Make the basic Internet access settings for the base station router via your PC.
All data required for the configuration of the Internet connection can be obtained from
your Internet service provider.
Establishing the connection to the router Web configurator
¤
Switch on your PC.
¤
If necessary, enable DHCP on your PC, i.e. activate the
option in the network settings for the LAN connection.
¤
Start the Web browser (e.g. Internet Explorer or Firefox) on your PC.
¤
In the Web browser's address field, enter the name or private IP address (LAN address)
of the base station router:
http://router.gigaset or
http://192.168.1.1 (default setting)
The registration page of the router opens.
Welcome
¤
Enter the router password (case sensitive) and click OK. 0000 is preset as the router
password by default.
Please note:
For security reasons you should change the router password at a later stage (page 82).
When registration is finished, the router's
Starting the wizard for the basic router settings
The wizard for the basic router settings helps you to put your base station into service and
guides you step-by-step through the configuration process with the most important set-
tings.
¤
Click the Basic Setup Wizard
The Regional Options
The wizard is operated as follows:
When you have made all the settings on a wizard Web page, click Next>. Click the
button to return to the previous page. The
ing the configuration of your base station.
entry to start the wizard.
Web page is displayed.
Obtain IP address automatically
page opens.
Home
Cancel button ends the wizard without chang-
First steps
<Back
15