Table of Contents
Advertisement
Defining the router's name and domain
Displaying DHCP Clients
¤
Open the following Web page:
A list will be displayed of all subscribers (PCs etc.) in your local network that have been
assigned a dynamic IP address. The MAC address, the IP address currently assigned and, if
necessary, the computer/device name for each client will be listed for identification.
If the DHCP client is activated on the base station phone
automatically, page 87) this will be shown in the list with the name "telephony".
Obtained
You can enter this name in the address field of the PC's Web browser instead of the IP
address if you want to establish a connection to the phone Web configurator (page 85).
Defining the router's name and domain
You can assign a name to your router. You can enter this name instead of the IP address
when you create a connection to the router's Web configurator:
http://Host
Name.
If the router is located in a different network, you also have to enter the name of the
domain which contains the router:
¤
Open the following Web page:
¤
Enter the name of your choice for your router in the
the domain in the
¤
Click
Set
to apply the settings.
The router is rebooted and you are logged off. The
the reboot.
Setting the Regional Options
You can select the time zone for your router's operation and determine whether the time
should be automatically applied from a time server on the Internet.
¤
Open the following Web page:
¤
In the
field select the country in which you operate your base station.
Country
¤
Highlight the required option in the
¤
Enter the Internet address for the time server in the
¤
Click
Set
to apply the settings.
Router Settings
http://Host Name.Domain
Router Settings
field.
Domain Name
Router Settings
Use Time Server
¢
¢
Local Network
(IP address type
Name.
¢
¢
Administration
field, and the name of
Host Name
Web page is displayed again after
Login
¢
¢
Administration
field.
Time Server
field.
DHCP
Clients.
=
Regional
Options.
Regional
Options.
81
Advertisement
Table of Contents
