Locating A Handset ("Paging"); De-Registering Handsets; Using Several Handsets; Making Internal Calls - Siemens Gigaset AS200 User Manual

Remote operation when on the move
You can check and activate your answer machine
from any other telephone (hotel, pay phone etc.).
Requirements:
◆
¢
You have set a system PIN other than 0000
page 17.
◆
The phone you are using for remote operation has
touch tone dialling (DTMF), i.e. you hear different
tones when you press the keys.
Calling the answer machine and playing back
messages
~
(Dial your own number)
announcement: press the
PIN
The following keys are used for operation:
A
Go to the start of the current message.
Press twice to go back to the previous mes-
sage.
B
Stop playback. Press again to resume.
3
Skip to next message.
0
delete current message.
Activating the answer machine
~
(Enter your own number and allow the phone to ring
until you hear the message: "Please enter PIN")
enter system PIN
Your answer machine is activated. It tells you how
much memory time is left. The messages are now
played back. The answer machine cannot be deacti-
vated remotely.
Locating a handset
("paging")
You can locate your handset using the base station.
◆
¢
Briefly press the registration/paging key on the
base station ( page 1).
◆
All handsets will ring simultaneously ("paging"),
even if the ringer tones are deactivated.
¢
End paging: briefly press the registration/paging key
on the base station (
a handset.
¢
while listening to your
9
key and enter the system
¢
c
page 1) or the talk key
10
Registering handsets
You can register up to four handsets on your base sta-
tion (Gigaset AS200) recommended).
Please note:
Each additional handset must be registered on the
base station in order for it to work properly!
For automatic registration of handsets to
Gigaset AS200/AS200A
Manual registration of handsets to
Gigaset AS200/AS200A
1. On the handset ¢
¢
MENU Settings
Register HS
base station (default is 0000)
Registering flashes in the display
2. On the base station
Within 60 seconds of entering the system PIN, press
and hold the registration/paging key (
(min. 3 seconds).
Registration takes approx. 1 minute.

De-registering handsets

Handsets can only be de-registered by resetting the
~
base station to its default settings. This will also reset
other settings
If you have only registered handsets for other GAP-
compatible devices, these can only be de-registered
with a hardware reset

Using several handsets

Making internal calls

Internal calls are free calls to other handsets that are
registered to the same base station.
To make a call to other handsets, press
¢
~
◆
INT
¢
handset), the handset is called or
◆
INT star key
When a participant answers you can speak to them.
on
To end the call, press the end call key
¢
page 5.
¢ ¢
¢ ¢
OK Handset
¢
OK Enter the system PIN of the
.
OK
.
¢
page 11.
¢
page 11.
(1...4, enter internal number of the
P
, all handsets are called.
a
¢
OK
¢
page 1)
.