Functions During A Call - Siemens Gigaset A580IP Manual

Functions during a call

Prerequisite: Your phone will permit two parallel VoIP connections (see Allow 1
£
VoIP call only, Page
Consultation calls
During an external call:
¢
§Menu§
External Call
Select and press
~
Enter the number (if necessary the suffix) or copy it from the directory.
c
Press the Talk key.
The number is always dialed via VoIP. If no suffix is entered, it is selected via the VoIP
send number.
Please note
After a few seconds, the number selected for a consultation call is saved in the Last
Number Redial list.
If the participant does not answer:
¤
Press the Display key
If the participant answers, you have the following options:
u
Toggling:
¤
Use q to toggle between the participants.
¤
End call with active participant:
Press the End Call key a, to end the current call. The participant who was
previously waiting will automatically call you back.
u
Conference call:
¤
Talk to both participants:
¤
End conference call (toggle):
¤
End call with both participants: press the End Call key a.
u
Call forwarding (provider-dependent):
You can connect the two external participants.
Prerequisites:
– You are toggling calls and you phoned the currently active participant your-
self.
– You have activated call forwarding via the Web configurator (
Depending on the setting in the Web configurator (
¤
Press the End Call key a.
Or:
¤
Press key S.
If call forwarding was successful, a message will appear to this effect. The hand-
set will then switch to idle.
If call forwarding was not successful, the party that was previously waiting will
call you back.
118).
§OK§
.
§End§
, to return to the waiting call.
¢
§Menu§
¢
§Menu§
Conference Call.
¢
§Menu§
Network services
End Active Call.
End Conference.
£
Page 129):
£
Page 129)
55