Functions; Setting Up An Enquiry During A Call; Toggle - Switching Between Two Users; Adding Callers To A Conference - Siemens HiPath 4000 Operating Instructions Manual

CONSULT
Toggle
START CONF.

Functions

Please proceed as shown in the overview on page 50 to use one of
these functions.

Setting up an enquiry during a call

You can use this function to consult another internal or external party
while a call is in progress.
Note:
If you are routed to a voicemail system's mailbox when per-
forming a callback, you can terminate the function with the
NET/Callback key (hold it down for at least 1 second).
Toggle – switching between two users
You can use this function during an enquiry to switch back and forth
between calling parties as often as needed.
Note:
The toggle function cannot be performed with a voicemail sys-
tem mailbox.

Adding callers to a conference

This function allows you to set up a telephone conference with up to
eight calling parties. The calling parties are added one after the other.
Repeat the procedure described in the overview on page 50 for each
calling party.
Note:
If you are routed to a voicemail system's infobox during a con-
ference, you can terminate the function with the NET/Callback
key (hold it down for at least 1 second).
51