The Base Station At A Glance - Siemens Gigaset C385 Instruction Manual

The base station at a glance

The base station at a glance
You can use the keys on the base station to
register handsets to the base station,
search for handsets (paging)
and operate the integrated answering
machine.
C385 base station
6
5
7
1 Registration/Paging key:
Press briefly: Search for handsets (paging),
¢
page 38.
Press and hold: Register handsets and DECT
¢
devices, page 38.
2 On/Off key: Activate/deactivate answering
machine.
LED lights up: Answering machine is acti-
vated.
LED flashes: The answering machine is
recording a new message.
2
During message playback:
¢
page 38
Please note:
u
u
2
1
4
3
3 Play/Stop key:
Play back new messages from answering
machine or cancel the playback
(press briefly).
Play back new and old messages
(press and hold).
LED flashes: At least one new message is
present.
LED flickers: Memory is full.
4 Skip to next message (press once) or skip
ahead two messages (press twice).
5 Skip back to beginning of the message
(press once) or to the previous message
(press twice).
6 Delete current message.
7 Adjust volume during message playback:
ñ
Press to increase the volume; Press
lower the volume.
While an external call is being signaled:
Adjust ringer melody volume.
If the answering machine is being oper-
ated from a handset, or if it is recording
a message, you cannot operate it from
the base station.
If the LED flashes although the answer-
ing machine is switched off, it means
there is still at least one new message
that has not been played back yet.
ð
to