Download  Print this page

Activating/Deactivating Beeps; Activating/Deactivating Base Station Display - Siemens Gigaset 3000 Classic Operating Instructions Manual

Hide thumbs

Advertisement

Activating/deactivating beeps

• Confirmation beeps – function code 13 (both beeps)
– Confirmation beep (1 beep) when you conclude a
function and replace the unit in the charging unit
– Error beep (4 short beeps) when you make an incorrect
entry
• Key beep – function code 14
– every keystroke is confirmed
• Battery warning beep – function code 15
– when the battery is empty
You can also activate the battery warning beep for call
status only = enter 2.
e.g.
e.g.

Activating/deactivating base station display

The current base station is displayed when the handset is
idle.
e.g.
Press the set key.
For example, enter function code 14 and
confirm.
For example, deactivate the key beep.
Deactivate = 0; activate = 1
Save the entry.
Press the set key.
Activate the function.
For example, activate the display.
Activate = 1; deactivate = 0
Save the setting.
17

Advertisement

Table of Contents
loading

  Related Manuals for Siemens Gigaset 3000 Classic