Standard Horizon ECLIPSE DSC PLUS GX1150 Owner's Manual page 48

6. Press the
Call signal.
7. After the GROUP CALL is transmitted, all
the radios in the group will switch to the
channel which is selected on step 5 above.
8. Press the
tion mode.
9. Listen to the channel to make sure it is not
busy, then key the microphone and call the
other vessels you desire to communicate
with.
Manual Calling
You may enter an MMSI number manually to contact without the Setting up the
Group call number.
1. Press the
pear.
2. Press the
(To cancel, press the
3. Press the
and the "Group Directory" will appear.
4. Press the
"MANUAL", then press the
5. Press the
numbers, 0-9. To enter the desired number and
move one space to the right press the
peat this procedure until all nine space of the MMSI
number which you want to contact are entered.
6. If a mistake was made entering in the MMSI num-
ber, repeat pressing the microphone's
the wrong number is selected, then press the
/ keys to correct the entry.
7. When finish the entering the MMSI number, press
and hold the
8. Press the
Page 48
key again to transmit the Group
key to return to radio opera-
key. The "DSC MENU" will ap-
/ keys to select "GROUP".
key or
key. The transceiver will beep,
/ keys to select
/ keys to scroll through
key.
key, then press the
key.)
key.
key. Re-
key until
/ keys to select the operating
GX1150