Priority Scanning P-Scan; Priority Channel Setting - Standard Horizon ECLIPSE DSC PLUS GX1150 Owner's Manual

11.7.3 Priority Scanning P-SCAN

In the default setting, Channel 16 is set as the priority channel. You may change
the priority channel to another channel from Channel 16 in the Radio Setup
Mode, refer to section "13.5 PRIORITY CHANNEL SET."
1. Adjust the SQL knob until background noise disappears.
2. Select a desired channel to be scanned using the
3. Press and hold the
on the display which indicates the channel has
been programmed into the transceivers memory.
4. Repeat step 2 for all the desired channels to be
scanned.
5. To DELETE a channel from the transceiver's memory, select the channel
then press and hold the
6. To start priority scanning, just press the
momentarily. "P-SCAN" appears on the LCD. Scan-
ning will proceed between the memorized chan-
nels and the priority channel. The priority channel
will be scanned after each programmed channel.
7. To stop scanning, press the

11.7.4 Priority Channel Setting

1. Press and hold down the
MENU" appears.
2. Press the
"RADIO SETUP" menu with the
3. Press the
4. Press the
nel.
5. Press the
6. Press the
turn to radio operation.
Page 28
key until "MEM" is shown
key until "MEM" disappears from the LCD.
key, then select "PRIORITY CH" in the
key.
/ keys to select the Priority chan-
key to store the selected setting.
key to exit the menu mode and re-
key
or key.
key until "SETUP
/ keys.
/ keys.
GX1150