Table of Contents
Advertisement
Key
Press the
"GROUP CALL", "ALL SHIPS CALL", "POS REQUEST", "POS REPORT", "DSC
LOG", and "DSC TEST" functions can be accessed from the "DSC MENU".
Before the "DSC MENU" menu can be selected a MMSI must be en-
tered. Refer to section "12.2 MARITIME MOBILE SERVICE IDEN-
TITY ( MMSI ) ."
Secondary use
Press and hold the
(refer to section "13 RADIO SETUP"), "DSC SETUP", "POS INPUT", and "MMSI
SETUP" functions can be accessed from the "SETUP MENU".
KEYPAD
/
Keys
The
select items in the DSC OPERATION and SETUP menus.
Key
Immediately recalls channel 16 from any channel location and automati-
cally selects high power. Holding down this key recalls channel 9. Press-
ing the
Secondary use
Press and hold the
USA, Canadian, and International Channel Groups.
Key
Press this key to start and stop the scanning of programmed channels.
Refer to section "11.7 SCANNING" for details.
Secondary use
To add a channel into the scan memory, select the channel and press
and hold the
To delete a memorized channel from scan memory, select the channel
and press and hold the
play.
[ DISTRESS ] Key
Used to send a DSC Distress Call. To send the distress call refer to section
"12.3.1 Transmitting a Distress Alert".
GX1150
key to access the "DSC MENU". The "INDIVIDUAL CALL",
key to access the "SETUP MENU". The "RADIO SETUP"
and
keys are used to select a desired channel and to
key again reverts to the previous selected working channel.
key then press the
key until "MEM" is shown on the display.
NOTE
key until "MEM" is removed from the dis-
key to switch between the
Page 21
Advertisement
Table of Contents
