Transmitting A Position Request To Another Vessel - Standard Horizon ECLIPSE DSC PLUS GX1150 Owner's Manual

The GX1150 has the capability to turn off the Position Request ringer.
1. Press and hold down the
MENU" appears.
2. Press the
SETUP" menu.
3. Press the
with the
4. Press the
5. Press the
QUEST".
6. Press the
7. Press the
8. Press the
ting.
9. To exit this menu and return to radio operation
mode press the
If you wish to return to enabling the ringer tone, just repeat the above proce-
dure, pressing the

12.8.2 Transmitting a Position Request to Another Vessel

Pre-Programmable Request
1. Press the
pear in the display.
2. Press the
QUEST".
3. Press the
rectory. This directory uses the INDIVIDUAL Di-
rectory information.
4. Press the
then press the
5. Press the
request DSC call.
6. When the GX1150 receives the position
from the polled vessel, the GX1150 will pro-
duce a ringing alarm sound and the posi-
tion from the polled vessel is sent to a GPS
Chart plotter via NMEA 0183.
7. Press any key to stop the alarm.
8. Press the
polled vessel transferred on the display.
Page 52
key until "SETUP
/ keys to select "DSC
key, then select "DSC BEEP"
/ keys.
key.
/ keys to select "POS RE-
key.
/ keys to select "OFF".
key to store the selected set-
key.
/ keys to select "ON" in step "7" above.
key. The "DSC MENU" will ap-
/ keys to select "POS RE-
key to show the Position request di-
/ keys to select a name,
key.
key to transmit the position
key to show the position from the
GX1150