Table of Contents
Advertisement
Microphone
PTT (Push-To-Talk) SWITCH
Keys the transmitter when the trans-
ceiver is in radio mode.
/
KEYS
The
and
crophone function the same as the
and
of the transceiver.
MICROPHONE
Transmits the voice message with
reduction of background noise, us-
ing Clear Voice Noise Reduction
Technology.
Be sure your mouth is about 1/2 inch (1.3 cm) from the mic hole for
best performance.
Key
The
key on the microphone functions the same as the
front panel of the transceiver.
Immediately recalls channel 16 from any channel location. Holding down
this key recalls channel 9. Pressing the
ously selected working channel.
Key
Press this key to toggle the transmit output power between 25 W (High)
and 1 W (Low) power. When the
is on channel 13 or 67, the power will temporarily switch from LO to HI
power until the PTT is released.
The
key does not function on transmit inhibited and low power only
channels.
1W low power is indicated by LO on the display. When 25W high
power is selected the display do not show an indication.
GX1150
keys on the mi-
keys on the front panel
NOTE
key again reverts to the previ-
key is pressed while the transceiver
NOTE
key on the
Page 23
Advertisement
Table of Contents
