Table of Contents
Advertisement
6. Press the
letter of the group name you want to reference in
the directory.
7. Press the
and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete.
The name can consist of up to eleven characters,
if you do not use all eleven characters press the
key to move to the next space. This method
can also be used to enter a blank space in the
name. To clear the previous letter, press the
key.
9. After the eleventh letter or space has been entered, press and hold the
key to advance to the MMSI number (Maritime Mobile Service Identity Num-
ber) entry.
10. Press the
sired number and move one space to the right press the
this procedure until all nine space of the MMSI number are entered.
11. If a mistake was made entering in the name or the MMSI number repeat
pressing the microphone's
then press the
12. To store the data entered, press and hold the
key.
13. To enter another individual address, repeat steps
4 through 12.
14. To exit this menu and return to radio operation mode press the
12.7.2 Transmitting a Group Call
Pre-Programmable Calling
1. Press the
pear.
2. Press the
(To cancel, press the
3. Press the
the "Group Directory" will appear.
4. Press the
want to contact.
5. Press the
select the operating channel you want to commu-
nicate on and press the
GX1150
/
keys to scroll through the first
key to store the first letter in the name
/
keys to scroll through numbers, 0-9. To enter the de-
or
key to enter the correct letter or number.
key. The "DSC MENU" will ap-
/
keys to select "GROUP".
key or
key. The transceiver will beep, and
/
keys to select the "Group" you
key, then press the
key.
key until the wrong character is selected,
key.)
/
keys to
key. Repeat
key.
Page 47
Advertisement
Table of Contents
