Standard Horizon ECLIPSE DSC PLUS GX1150 Owner's Manual page 42

Manual Calling
You may enter an MMSI number manually to contact without storing it in the
Individual Directory.
1. Press the
2. Press the
(To cancel, press the
3. Press the
the "Individual directory" will appear.
4. Press the
press the
5. Press the
bers, 0-9. To enter the desired number and move
one space to the right, press the
this procedure until all nine spaces of the MMSI
number which you want to contact are entered.
6. If a mistake was made entering in the MMSI num-
ber repeat pressing the microphone's
the wrong number is selected, then move the chan-
nel knob to correct the entry.
7. When finished entering the MMSI number, press
and hold the
8. Press the
select the operating channel you want to communi-
cate on and press the
9. Press the
DSC signal.
10. After the INDIVIDUAL CALL is transmitted, if a reply
signal is not received, "WAIT FOR ACK" is shown on
the display which means the GX1150 is waiting
for the ship you called to send an acknowledg-
ment.
11. To transmit the call again, press the
lowed by the
12. When the GX1150 receives an acknowledgement
from the vessel you called, the radio will automati-
cally switch to the operating channel selected in
step 5 and produce a ringing sound.
13. Press the
sure it is not busy, then key the microphone and
call the other vessel you desire to communicate with.
Page 42
key. The "DSC MENU" will appear.
/ keys to select "INDIVIDUAL".
or
key. The transceiver will beep, and
/ keys to select "MANUAL", then
key.
/ keys to scroll through num-
key.
key, then press the
key.
key again to transmit the individual
key.
key to listen to the channel to make
key.)
key. Repeat
key until
/ keys to
key fol-
GX1150