Position Report; Setting Up Position Report Ringer - Standard Horizon ECLIPSE DSC PLUS GX1150 Owner's Manual

12.9 POSITION REPORT

The feature is similar to Position Request, however instead of requesting a
position of another vessel this function allows you to send your position to an-
other vessel. In order to send your position you need to have a GPS receiver
connected or to have manually input your position. See section "12.11 MANUAL
INPUTTING OF THE GPS LOCATION."
12.9.1 Setting up a Position Report Ringer
The GX1150 has the capability to turn off the Position Report ringer.
1. Press and hold down the
MENU" appears.
2. Press the
SETUP" menu.
3. Press the
with the
4. Press the
5. Press the
TION REPORT".
6. Press the [ ENT ] key.
7. Press the
8. Press the
9. To exit this menu and return to radio operation
mode press the
To enable the Position Report Ringer, repeat the above
procedure, pressing the
in step "7" above.
GX1150
key until "SETUP
/ keys to select "DSC
key, then select "DSC BEEP"
/ keys.
key.
/ keys to select "POSI-
/ keys to select "OFF".
key to store the selected setting.
key.
/ keys to select "ON"
Page 55